Sun Tunnel for Tiled Roof – Monodraught For Sloped Ceiling

The Monodraught Sun Tunnel For Tiled Roof – Sloped Ceiling. This Sun Pipe directs sunlight into a room from the roof level. The Sun Tunnel collects daylight using a diamond dome, a silverised PVD (Physical Vapor Deposition) coated mirror-finished aluminium tube with a ceiling diffuser to evenly distribute the light around the room. Sunlume Diamond Sun Pipes are suited to almost any application, and have been installed anywhere from residential bedrooms to large sport arenas.
This pitched gallery roof SUNLUME skylight tube has been specifically developed to suit plain tile roof finish and sloping ceilings.

Product Downloads

• Monodraught Sun Tunnel Datasheet / Informational Brochure
• Monodraught Universal Installation Instructions

Technical information

		1. Acrylic Diamond Dome High impact resistant patented 4 mm thick clear acrylic diamond dome with UV inhibitors, complete with brushed nylon condensation gasket. This maximises the penetration of natural daylight and is designed to capture the early morning and late afternoon sun.
		2. ABS Slate Flashing Plate. ABS (acrylonitrile-butadiene styrene) slate flashing plate manufactured from 3.5mm thick ABS topped with PMA (Polymer Modified Asphalt) for a long lasting, durable finish is suitable for majority of slate roofs. Complete with ABS undercloak roofing felt support.
		3. 610 Plain End Pipe (Crimped end) The 610mm extension pipe is manufactured from 0.5mm thick anodized aluminium pipe and is coated with MIRO SILVER® 27/427OAG to maximise reflections and limit light diffusion. The crimped ends fit tightly into the plain ends.
		4. 45° Adjustable Angle The 45° adjustable elbow is manufactured from 0.5mm thick anodized aluminium pipe and is coated with MIRO SILVER® 27/427OAG to maximise reflections and limit light diffusion. It allows to create an offset and the pipe to deviate course when required. Elbow sections can be rotated to achieve different angles.
		5. 610 Plain End Pipe The 610mm plain end pipe is manufactured from 0.5 mm thick anodized aluminium pipe and is coated with MIRO SILVER® 27/427OAG to maximise reflections and limit light diffusion.
		6. Plywood Backing Plate/Template The 4mm thick plywood backing plate/template can be used to ‘mark out’ the opening at ceiling level and to provide additional structural fixing for the diffuser.
		7. 250 Ceiling Extension The 250mm ceiling extension is manufactured from 0.5mm thick anodized aluminium pipe and is coated with MIRO SILVER® 27/427OAG to maximise reflections and limit light diffusion. This provides a permanent joint between the diffuser and plain end pipe.
		8. Double Glazed MicroPrism Ceiling Diffuser The double glazed microprism diffuser is designed to offer excellent thermal performance whilst ensuring maximum spread of natural daylight within the space and an even light distribution. The trim is supplied in white as standard. 230mm Sunlumes are provided with a 3-piece polycarbonate diffuser.
		7. Installation Pack The installation pack contains silicone sealant, screws, sealed rivets, neoprene washers, brushed nylon condensation seal, aluminium tape and universal installation instructions.

Delivery & returns information

300mm diameter currently around 6 working weeks. 530mm diameter currently around 10 working weeks. Other stocked sizes remain on standard delivery.